Filter
Top Products
9
Installation
2. Plug one end of the supplied long modu-
lar cord into
TEL LINE
.
3. Insert the supplied AC adapter’s barrel
plug into
DC IN 9V
.
4. Route the adapter
and modular cords
through the strain
relief slots on the
base.
5. Plug the modular
cord’s other end into
the phone jack.
6. Plug the adapter into a standard AC out-
let.
7. Lift the base’s antenna to a vertical posi-
tion.
On a Wall Plate or Wall
1. Insert the bracket’s tabs into the base’s
lower tab slots, then press down on the
bracket’s clips and insert them into the
clip slots.
2. Plug one end of the supplied short mod-
ular cord into the
TEL LINE
jack on the
back of the base.
3. Insert the supplied AC adapter’s barrel
plug into
DC IN 9V
.
4. Route the adapter’s cord through the
strain relief slot on the base.
5. Plug the modular cord’s other end into
the wall plate jack, then align the base’s
keyhole slots with the wall plate studs
and slide the base downward to secure
it.
6. Plug the adapter into a standard AC out-
let.
7. Press and lift out the
handset holder. Rotate
it 180°, then snap it
back into place so it
holds the handset.
8. Lift the base’s antenna to a vertical posi-
tion.
DC IN 9V Jack
TEL LINE