Radio Shack 2.4 GHz Digital Spread Spectrum Cordless Telephone with Caller ID/Call Waiting Deluxe Cordless Telephone User Manual


 
18
Caller ID Operation
You can use a handset holder (available
from your local RadioShack store) to
hang the handset on your belt for
greater convenience.
ˆ
Caller ID Operation
If you subscribe to Caller ID service from
your phone company, the phone company
sends information about the call, as well as
the time and date, between the first and sec-
ond rings of every call you receive.
The phone displays this information after the
second ring, and it stores up to 50 Caller ID
records for later review. It also shows if caller
information is unavailable or if the name and
number were blocked by the caller (see
“Caller ID Messages”).
If you subscribe to Call Waiting with Caller
ID, you will hear a tone through the handset
when a call comes in, then the Caller ID
record appears. If you want to answer the in-
coming call, press
FLASH
. To resume the
previous phone conversation, press
FLASH
again.
If the phone’s Caller ID memory becomes
full, any new call replaces the oldest call’s
record.
CALL WAITING OPTIONS
SERVICE
With this phone, you can order Call Waiting
Options Service from your phone company.
This service provides you with more choices
on how to handle a second call when you are
already on the phone. You can switch be-
tween the callers, have a 3-way conference
call with both callers, send the second caller
to your voice mail, or answer the second call-
er with a prerecorded message asking them
to hold the line.
Before you can use the Call Waiting Options
Services, you must:
subscribe to the Options service from
your telephone company.
set the Caller ID/Call Waiting feature to
Opt (see “Turning Caller ID/ Call Waiting
On/Off” on Page 12).
Using Call Waiting Options
Note:
An error tone sounds and the phone
exits the menu mode if you wait more than
20 seconds between each keypress.
You hear a soft beep when a call comes in
while you are already on the phone. The dis-
play shows the caller name and phone num-
ber.
Follow these steps to use Call Waiting Op-
tions Services.
1. Press
FUNC
. A list of several options,
beginning with
7ia
7ia7ia
7ia
je
jeje
je
>ebZ
>ebZ>ebZ
>ebZ
appears.
2. Repeatedly press
VOL/CID
9
99
9
to scroll
through the options list. You can also
press the number of the desired option.
3. Choose one of the following options,
then press
SELECT/CH
.
Ask to Hold
— A waiting caller hears a
prerecorded message stating that you
will be available shortly, and is put on
hold.
9Wbb
9Wbb9Wbb
9Wbb
>ebZ_d]
>ebZ_d]>ebZ_d]
>ebZ_d]
appears on your phone.
Tell Busy
— A prerecorded message
indicates you are busy, and the waiting
call is disconnected.
J
JJ
JebZ
ebZebZ
ebZ
8
88
8kio
kiokio
kio
appears
on your phone.
Take Message
— A waiting caller is
sent to your phone company’s subscrip-