Filter
Top Products
Remotely recording a new OGM:
1. Call the answering machine from a separate line.
2. During the OGM, enter your security code.
3. Press the "#" and then the "1" pad (for OGM-1) or the "2" pad (for OGM-2)
4. After the long beep, record your new OGM.
5. When finished, press the "9" pad and then the new OGM will play back.
If satisfied, press the "∗" pad to end the call or repeat this step to record a new
OGM again.
Erasing all messages:
1. Call the answering machine from a separate line.
2. During the OGM, enter your security code.
3. Press the "5" pad to play messages.
4. To remotely erase all messages, press the "#" and then the "0" pad.
Recording a memo:
1. Call the answering machine from a separate line.
2. During the OGM, enter your security code.
3. Press the "#" and then the "3" pad.
4. After the long beep, record your memo.
5. Press the "9" pad when finished.
Remote room monitoring:
This feature will allow you to call in and monitor the room in which the answering
machine is located.
1. Call the answering machine from a separate line.
2. During the OGM, enter your security code.
3. Press the "7" pad and the unit will monitor the situation for 90 seconds, beep
and then stop.
4. If you want to continue monitoring, press the "7" pad again.
5. To stop monitoring, press the "9" pad.
Remotely setting the unit to answer-only or anser/record mode:
1. Call the answering machine from a separate line.
2. During the OGM, enter your security code.
3. Press the "8" pad to cycle through the modes (Answer/Record, Answer-Only
and Answer-off).
4. After pressing the "8" pad, you will hear the respective OGM. If you only hear
a long beep, then the unit is set to the Answer-Off mode.
5. Press the "9" pad when finished.
Note:
Pressing the "∗" pad will stop all operations and release the line.
11