Filter
Top Products
14
If your network operator is not the main national network operator, you may have to change the
line settings. Some of the following settings are available subject to a subscription with your
operator and also technical availability.
The options on this menu are country dependent and some may not exist in
certain countries.
To enter the following settings : or
To scroll through the menus
Press to exit the programming option.
DEF
Other technical settings (country dependent)
✦ To unregister the handset
enter the RC code*
✦ To unregister all the handsets (except the handset you are using)
enter the RC code*
JKL
WXYZ
GHI
WXYZ
✦ Changing the dial mode
This allows you to select either DTMF tone dialling (faster dialling, access to
operator services) or pulse dialling (also called Loop disconnect and used in
countries without DTMF capability).The default value is TONE. (Country
dependent, you may not be able to change to Pulse).
or to choose TONE or PULSE
DEF
✦ Changing recall type
The use of some services accessed with (call waiting, call forward...) will
depend on the flash setting (short/long) according to your installation type (ISDN,
Public, PABX). (Country dependent)
or to choose between
Short or Long
DEF
✦ Changing Caller Identification type
The Caller Identification service (Name and Number) is available subject to a
subscription to your operator (according to availability). (Country dependent)
or to choose the right setting among the list
DEF
: Short .
: Long.
Once the menu is selected, enter the RC* code written under the
base and press to confirm.
Warning : If you wish to associate non Philips handsets to the Kala 300 range
base stations, make sure that this handset is GAP compliant otherwise it will not
operate properly.
*RC code
(Registration
Code) is
written under
the base.
Warning : Once unregistered, the handset is no longer operational.
Kala 300 master UK indice 2.qxd 27/09/02 10:41 Page 14