Filter
Top Products
10
Press to
deactivate call
by call call
screening.
Press to
permanently
deactivate call
screening.
✦ Recording your personal outgoing message
speak after the beep
*
To exit
However, if you do so, you will permanently erase the pre-recorded
outgoing message.
✦ Recording a memo
If you want to leave a local message for your family :
speak after the beep
To exit
TUV
ABC
GHI
TUV
JKL
GHI
*You will hear
the personal
outgoing
message.
This allows you to listen to any caller leaving a message and to decide whether or
not to take the call. By default the call screening is activated on the base station.
✦ Activating call screening
From the handset :
From the base station : or
✦ Deactivating call screening
From the handset :
From the base station : or several times.
Screening the calls while a message is being left
answering only mode
answering &
recording mode
✦ Selecting the answerphone mode
You can select either answering mode only (which plays an outgoing message but
does not take messages) or answering & recording mode (which takes messages.)
or
to switch between modes
To exit
DEF
TUV
WXYZ
Advice : Prior to using the answering-only mode, make sure that you have
adapted the outgoing message.
✦ Increasing the volume of the call screening
During call screening, the volume can be adjusted either from the base
station or the handset. 4 volume levels are available, including silent.
Press until you have reached the desired volume.
✦ Call interception
The recording of the current message is stopped and the call is taken.
The last
selected level
will be
registered for
the next call.
When the
answerphone
is on-line,
blinks.
This local
message
(memo) is
treated like all
other
answerphone
messages.
Kala 300 master UK indice 2.qxd 27/09/02 10:41 Page 10