Filter
Top Products
SoundStation Premier Installation Instructions and User's Guide
5
8. Press ON/OFF to hear a dial tone.
The microphone status LEDs on the
top of the console will show a steady
green when the system is on.
Press
ON/OFF to terminate any
conference call.
7. Place the SoundStation Premier
500D/550D on a flat, stable
surface in the center of the room.
If using the extended hypercardiod
microphones with the 550D, for the
best coverage, position as shown in the
examples to the right.
ON/OFF
VOL
RINGER VOL
9. Press ON/OFF again and while
the phone is off adjust the ringer
volume on the SoundStation Premier
500D/550D by pressing SHIFT
then
VOL or VOL .
There are four settings: OFF, LOW,
MID, and HIGH. The levels will be
heard after each key press and shown
on the display. After 5 seconds the
display will return to its previous mode.
10. To program your phone number, press
SHIFT then press the CONF key.
Enter the phone number with area code,
using the
*
key to enter a space.
When finished, press
CONF again.
To retrieve the phone number at any
time during a phone call, press
SHIFT
then press the
CONF key. The phone
number will be displayed for 10
seconds, after which the display will
return to its previous mode. This display
will default to this number while the
conference phone is inactive.
You are now ready to use your
SoundStation Premier 500D/550D.
CONF
THIS PHONE #