Filter
Top Products
Integration Guide for the Polycom SoundStation IP 7000 Phone Connected to a Polycom HDX System in Unsupported VoIP Environments
12
6. Scroll down to Server Menu, then press the SELECT soft key.
7. Using the right arrow key, select HTTP as the Server Type, and then
press the OK soft key.
8. Scroll down to Server Address, then press the EDIT soft key.
9. Enter downloads.polycom.com/voice/IP7000 as the server address, then
press the OK soft key.
The URL is case sensitive.
10. Press the EXIT soft key.
11. Press the EXIT soft key again.
12. Scroll down to Save & Reboot, then press the SELECT soft key.
The phone will reboot.
The following messages will appear on the screen:
— Waiting for network to initialize
— Downloading new BootROM
— Checking new BootROM
— Updating new BootROM
— BootROM updated, rebooting
— Formatting file system, please wait
— Downloading new application
— Checking new application
— Saving new application
— Checking new application
— Loading application
— Running <application filename>
— Welcome
The upgrade process will take some time.
Once the upgrade is complete, you can use the phone to place and answer
calls.
Note
The bootROM messages will not appear if the bootROM is not upgraded. The
bootROM is not upgraded every time the application is upgraded.
Upgrade times depends on how busy the nework is and the type of protocol used.
An update time greater than 10 minutes is not unusual.