Filter
Top Products
Using the Basic Features of Your SoundPoint IP 330/320 Phone
3 - 11
• Attended transfer—The parties are automatically connected to each other
after you exit the conference.
— Set up a conference call and then end your participation. For more
information, refer to Setting Up a Conference on page 3-9.
To transfer a call:
1. During a call, press Trans soft key.
The active call is placed on hold.
2. Enter the number to which you want to transfer the call.
A normal (or consultative) transfer is assumed.
3. As soon as the ring-back sound is heard or after the party answers, press
Trans soft key to complete the transfer.
You can talk privately to the party to which you are transferring the call
before the transfer is completed.
If you are using a handset, the transfer can be completed by putting the
handset on the cradle.
You can cancel the transfer before the call connects by pressing the Cancel
soft key.
To perform a blind transfer:
1. During a call, press the Trans soft key.
2. Press the Blind soft key.
3. Do one of the following steps:
a Enter the number to which you want to transfer the call.
Note
Access to the contact directory or received callers list at this point will be added in a
future release. For more information, contact your system administrator.