Polycom BPN100 Telephone User Manual


 
SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide
Part Number: 72-1004-01-J.doc
Page 14
Navigation
Up/Down buttons:
display previous/next menu item.
Select button:
selects the menu item or option.
OK softkey:
selects the menu item or option.
Save softkey:
saves the entry.
Bksp softkey:
backspaces to allow editing of entry.
Cncl softkey:
cancels edit and returns to previous menu level.
Up softkey:
returns to previous menu level.
Exit softkey:
exits the menu (at the top level).
End Call key:
exits to standby state (from any level)
Lock keys
Locks/unlocks the keypad. When enabled, the Keypad Lock
option will lock the keypad immediately. If the keypad is
locked, it may be unlocked by the end user pressing the
Unlk
softkey and then the # key.
Ring options
Allows the user to set the ring for three separate functions.
Telephone Ring is used for usual telephony functions. The
Auxiliary Rings may be used to set ringing patterns for OAI
applications.
Telephone ring
Allows the user to set a distinctive ring style, volume and
sequence. Select from an audible ring or a vibrate-only ring or a
vibrate ring along with or followed by an audible ring.
Ring cadence
The cadence is the rhythm of the ring. It may be set to a pre-
programmed ring cadence or it may be set to obtain its cadence
from the PBX. The
PBX option is designed to utilize any
distinctive rings sent by the PBX while allowing the user to set
unique rings for auxiliary applications.
Off: silent
PBX
: PBX determines ring cadence (e.g. the PBX may send
rings that differentiate between internal and external calls.)
Continuous: rings continually until answered
Short Pulse: rings in short bursts
Long Pulse: rings in long bursts
Ring tone
The
Play softkey allows the user to preview the tone before
selecting. If Ring Cadence is turned off, the Ring Tone option
will not appear on the menu. Select from five available tones
(scroll to
Tone 5 option).
Ring volume
(NetLink i640 Wireless Telephone
only)
The graduated volume bar indicates the levels. This setting may
be overridden by adjusting volume while the handset is ringing.
Select a volume level by pressing the
Up and Down side buttons
and then pressing the
OK softkey. If Ring Cadence is turned
off, the Ring Volume option will not display.
Vibrate cadence
The Vibrate cadence options are the same as for Ring Cadence.