Filter
Top Products
Handset Administration Tool Installation
PN: 1725-36039-001_C.doc
11
Installing the USB Driver
The USB driver installation allows the Dual Charger to be the
communication link between the handset and the PC. The folder
containing the
HandsetAdmin file contains the two USB driver files in a
folder called
USBDriver. The files are named slnkusb.sys and slnkusb.inf.
1. Find the USB driver files on the PC.
2. Place the Dual Charger on a flat, horizontal surface. Plug the
power supply into the Dual Charger and into an appropriate wall
outlet.
3. Plug the USB cable into the Dual Charger and into an available
USB port on the PC.
4. Power off a SpectraLink 8020/8030 Wireless Telephone, remove
the Battery Pack (optional), and place the handset in the Charger.
If properly seated, the handset automatically powers up in USB
mode and the handset screen displays a
USB Mode on indication.
If the handset is not properly seated in the Dual Charger, the USB
connection will not be made and the Battery Pack will begin
charging, and the handset screen displays a Charging… indication. If
this occurs, reseat the handset, check the connections on the USB
cable, and/or remove the Battery Pack and try again.