Filter
Top Products
13
Getting Started
GETTING STARTED
Your Link 6020 Wireless Telephone is designed for full mobility within
the workplace and operates much like a cell phone. It also interfaces
with the telephone system at your workplace and incorporates
advanced telephony features. This section covers the basic functions
available in every facility. For specific telephony system functions, see
the Facility-Specific Features section or contact your system administra-
tor.
Basic Handset Operation Summary
Place the handset into the charger for a minimum of two
hours. The handset's Battery Pack must be fully charged
before its first use. See the Charger Models section for full
information.
If you want to Then
Remove the
Battery Pack
Press down on the latch on the Battery Pack
at the back of the handset and pull the
Battery Pack towards you. The Battery Pack
releases outward.
Replace the
Battery Pack
Slide the lip of the Battery Pack into the
bottom of the cavity. Push the top of the
Battery Pack until it snaps into place. You
should not have to force it into the handset.
Turn handset on
Press and hold the END key until two chirps
sound.