Filter
Top Products
8
Connecting Your Telephone
Carefully remove your cordless telephone
from it’s box. If there is any visible damage,
do not attempt to operate this equipment.
Return it to the place of purchase.
Check to be sure that you have all items that
come with your telephone. You should have
a HANDSET, BASE UNIT, AC ADAPTER, TELE-
PHONE LINE CORD, BELT CLIP and OWNERS
MANUAL. A BATTERY is also included and is
located in the battery compartment.
If at any time you have questions about your
telephone please contact our Customer
Service Department at: 1-800-552-3368 or
423-622-7793.
Choosing a Location
1. This phone requires a modular phone
jack (RJ11) and a standard 120V AC
wall outlet.
2. Plug the AC Adapter directly
into outlet.
3. Do not plug other appliances into
outlet or have outlet controlled by a
wall switch.
4. Choose a location that is away from
normal activities.
CAUTION: USE ONLY WITH CLASS 2
POWER SOURCE 9V DC, 500mA.
Always connect the AC Adapter to the
phone before you connect it to the AC power.
When disconnecting the phone, disconnect
the AC power before you disconnect it from
the phone.
Installation
Follow these instructions to place the base on
a desk or tabletop.
1. Plug one end of the supplied modular
telephone line cord into the jack
marked TEL located on the back of
the telephone base.
2. Plug the modular telephone line cord’s
other end into a modular phone jack.
3. Insert the supplied AC Adapter’s
plug into the jack marked 9V DC
500mA located on the back of the
telephone base.
Getting Started
PULSE/TONE BOOST
ON/OFF
9VDC
500mA
TEL
!
USE ONLY WITH CLASS
(CLASSE) 2 POWER SOURCE