Filter
Top Products
E
N
G
L
I
S
H
15
To Dial from Memory:
1. Press the TALK button.
2. Press the MEM button.
3. Press the number on the dial pad
(0-9) where the desired number has
been stored.
4. The call will automatically dial.
5. Adjust volume and Clarity Power
as needed.
To Dial From Emergency Storage Location:
1. Press the TALK button.
2. Press the desired
EMERGENCY BUTTON.
3. The call will automatically dial.
4. Adjust volume and Clarity Power
as needed.
To use a TONE service on a Pulse Line
(Temporary Tone*):
1. Dial the number you wish to call
2. When the call is answered, press
the * key. Additional numbers you
dial are sent as tone signals.
3. After completing the call, press TALK
or return the handset to the base. The
phone will automatically reset.
Receiving a Call
Handset in Base of Telephone:
Lift the handset. Do not press TALK
because you will automatically
be connected.
Handset Out of Base:
1. Press the TALK button.
Ending a Call:
Place the handset in the base cradle or
press the TALK button to disconnect the line.
MAINTENANCE AND CARE
The Clarity 435 has been designed to give
you years of dependable service with a
minimum of care.
To ensure the utmost in performance,
follow these guidelines in caring for the unit:
1. Avoid dropping or knocking the unit.
2. Dust the unit regularly. Wipe the unit
with a soft damp cloth. Do not use
detergents and avoid excess moisture.
3. The Clarity 435 is an electrical
device. Avoid electric shock by
keeping the phone away from
water (i.e. bathroom, kitchen
sink, etc..)
Operating Your Telephone