Filter
Top Products
10
Handset Battery Charging
1. Place the handset in the base.
The CHARGE LED on the base will
light RED.
2. After the batteries are fully charged,
check for dial tone by pressing TALK
on the handset.
3. When the handset battery gets low,
there will be two (2) beeps every thirty
(30) seconds and the TALK button will
flash. If the battery becomes low
while you are on a call, you will be
disconnected after about two (2)
minutes. Terminate the call and
recharge the battery.
4. To recharge the battery pack, place
the handset in the base.
Getting Started
NOTE:
1. Make sure the contact points are
touching and the CHARGE LED is lit.
2. Be careful not to short battery with
conducting materials such as rings,
bracelets and keys.
Battery Life
1. Talk Time: 4 hours
Standby: 8 days without usage
2. Actual amounts will vary depending
on usage and amplifier settings used.