Filter
Top Products
English
EN 33
Access the answering machine
remotely
1
Make a call to your home number with a
touch tone phone.
2
Enter # when you hear the announcement.
3
Enter your PIN code.
» You now have access to your answering
machine, and you can listen to the new
messages.
Note
•
You have 2 chances to enter the correct PIN code,
before your phone hangs up.
4
Press a key to carry out a function. See the
'Remote access commands' in the following
table for a list of available functions.
Note
•
When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Repeat the current or listen to the
previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine on.
(not available when you listen to the
messages).
8 Stop listening to the message.
9 Switch the answering machine off.
(not available when you listen to the
messages).
Remote access
You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
•
The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.
Change the PIN code
1
Select [Menu] > [Answ. Machine] >
[Remote access] > [Change PIN], then
press [OK] to conrm.
2
Enter the old PIN, then press [OK] to
conrm.
3
Enter the new PIN code, then press [OK]
to conrm.
4
Enter the new PIN code again, then press
[Save] to conrm.
» The setting is saved.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Select [Menu] > [Answ. Machine] >
[Remote access], then press [OK] to
conrm.
2
Select [Activate]/[Deactivate], then press
[OK] to conrm.
» The setting is saved.