Filter
Top Products
9
ENGLISH
Topairyourheadsetwithyour
mobilephone
Make sure the headset is charged, your mobile
phone is turned on and its Bluetooth feature is
enabled. Check your phones user guide to learn
how to turn on Bluetooth on your phone.
1
With the headset turned off, press
until the LED starts blinking red and blue
alternately. The headset will remain in
“pairing mode” for 5 minutes.
2
Pairing typically involves a few simple steps
outlined below, please check your phones
user guide for details.
3
Access a menu on your mobile phone
typically called “Setup”, “Settings”,
“Bluetooth” or “Connectivity”. Select the
option to discover or search for Bluetooth
devices. After a few seconds your phone
should indicate that it has found the “Philips
SHB9000”.
4
Upon selecting the “Philips SHB9000” on
your mobile phone typically you will need
to confirm the pairing and enter a passcode.
Please enter the headsets passcode “0000”
(four zeros).
After successful pairing, the headset will connect
to the mobile phone. You will hear a long beep
to confirm successful pairing and the headsets
LED will change from flashing red/blue to
periodically flashing blue every three seconds.
Settings
Bluetooth
Select
Back
Connectivity
10:35
Add
Bluetooth
device
Settings
Select
Back
Connectivity
10:37
Enter Password
****
0000
Settings
Devices Found
Select
Back
10:36
Philips SHB9000