Philips SHB7110/37 Bluetooth Headset User Manual


 
10
6 Get started
6.1 Chargeyourheadset
Before you use your headset for the first time,
charge the battery for 6 hours for optimum
battery capacity and life time.
Warning
Use only the original charger or a standard
aftermarket micro USB cable for charging. Using
another charger may damage or destroy your
headset.
Caution
Finish your call before charging the headset, as
connecting the headset for charging will cut an
ongoing call. During charging you can operate
the headset normally.
Plug the charger into a wall outlet and connect
the charger cable to the headsets charging
socket.
During recharging the LED indicator will show a
red light. The LED will turn off once charging is
complete. If you try to charge the headset when
it is full the LED will not light up.
Typically a full charge will take 2 hours, during
this time you can use your headset for calls and
music.
Tip
You can save energy and protect the
environment by unplugging the charger after
charging is complete.