29
Manual registration
If auto registration fails, register your handset
manually to the base station.
1 Press MENU on the handset.
2 Select [ADVANCED SET] >
[REGISTER], then press OKtoconrm.
3 Press and hold on the base station
for 5 seconds (for the model with
telephone answering machine, you hear a
conrmationbeep).
4 Enter the system PIN. Press BACK to
make corrections.
5 Press OKtoconrmthePIN.
Registration is completed in less than 2 »
minutes. The base automatically assigns
a handset number to the handset.
Note
If the PIN is incorrect or no base is found •
within a certain period, your handset displays
anoticationmessage.Repeattheabove
procedure if registration fails.
Note
The preset PIN is 0000. No change can be •
made on it.
Unregister the handsets
1
If two handsets share the same base
station, you can unregister a handset with
another handset.
2 Press MENU.
3 Select [ADVANCED SET] >
[UNREGISTER], then press OK to
conrm.
4 Enter the system PIN. (The preset PIN
is 0000). Press BACK to remove the
number.
13 Advanced
settings
Enhance the audio quality
XHD(ExtremeHighDenition)soundmodeis
anexclusivefeaturewhichtransmitshighdelity
signals to the handset. It makes the phone
conversations sound like real-life conversations.
When you are in standby mode,
1 Press MENU.
2 Select [ADVANCED SET] > [XHD
SOUND], then press OKtoconrm.
3 Select [ON]/[OFF], then press OK to
conrm.
The setting is saved. »
When you are in a call,
1 Press OK to enter the options menu.
2 Change the XHD setting.
3 Press OKtoconrm.
The setting is saved. »
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 4
handsets.
Auto registration
1 Place the unregistered handset on the
base station.
The handset detects the base station »
and start to register automatically.
Registration is completed in less than 2 »
minutes. The base station automatically
assigns a handset number to the
handset.
English
EN
IFU_SE170-175_05_EN.indd 29 2009-12-17 17:40:19