Filter
Top Products
40 EN
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Recall time], then press [OK] to
conrm.
4 Select an option, then press [OK] to
conrm.
» The setting is saved.
Dial mode
Note
• This feature is country dependent and only applies to
models that support both tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Dial mode], then press [OK] to
conrm.
4 Select an option, then press [OK] to
conrm.
» The setting is saved.
First ring
If you have subscribed to the caller ID service
with your service provider, your phone can
cancel the rst ring before the caller ID is
displayed on the screen. After the phone is
reset, it can detect automatically if there is a
caller subscription and start to cancel the rst
ring. You can change this setting to suit your
preference. This feature only applies to models
with rst ring support.
Turn the rst ring on/off
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [First ring], then press [OK] to
conrm.
4 Select [On]/[Off], press [OK] to conrm.
» The setting is saved.
Note
• To reset the rst ring status, go to the reset menu.
Auto clock
Note
• This service is network dependent.
• Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your
phone with the public switched telephone
network (PSTN) automatically. For the date to
be synchronized, make sure the current year is
set.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Auto clock], then press [OK] to
conrm.
4 Select [On]/[Off]. then press [OK] to
conrm.
» The setting is saved.
Register additional handsets
You can register additional handsets to the base
station. The base station can register up to 4
handsets.