Philips M888 Cordless Telephone User Manual


  Open as PDF
of 52
 
36 EN
Listen to the incoming messages
You can listen to the incoming messages in the
sequence they are recorded.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Play], then press [OK] to conrm.
» New messages start playing. Old
messages start playing if there is no
new message.
• Press [Back] to stop listening.
• Press [Option] to enter the options menu.
• Press / to increase/decrease the
volume.
Delete an incoming message
1 When you listen to the message, press
[Option] to enter the options menu.
2 Select [Delete], then press [OK] to
conrm.
» The current message is deleted.
Delete all old incoming messages
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Delete all], then press [OK] to
conrm.
» A conrmation request is displayed on
the handset.
4 Press [OK] to conrm.
» All old messages are permanently
deleted.
Note
• You can only delete the read messages. No deleted
messages can be recovered.
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering machine.
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Msg quality], then press [OK] to
conrm.
4 Select the new setting, then press [OK] to
conrm.
» The setting is saved.
Note
• The sound quality can only be adjusted before
recording starts.
Set the ring delay
You can set the number of times the phone
rings before the call goes to the answering
machine..
1 Select [Menu].
2 Press / to select , then press [OK]
to conrm.
3 Select [Ring delay], then press [OK] to
conrm.
4 Select a new setting, then press [OK] to
conrm.
» The setting is saved.
Note
• Make sure that the answering machine is switched on
before this feature can be applied.
 previous next