Philips M550 Cordless Telephone User Manual


  Open as PDF
of 38
 
25EN
Register additional handsets
You can register additional handsets to the base
station. The base station can register up to 3
handsets.
1 Press MENU/OK on the handset.
2 Select [Services] > [Register].
3 Press and hold on the base station for 5
seconds, then press MENU/OKtoconrm.
4 Enter the system PIN/passcode. Press
REDIAL/C to make corrections. Press
MENU/OKtoconrmthePIN/passcode.
Note
• For models with an answering machine, you hear a
conrmationbeep.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
• If the PIN/passcode is incorrect or no base is found
within a certain period, your handset displays a
noticationmessage.Repeattheaboveprocedureif
registration fails.
Note
• The preset PIN/passcode is 0000. No change can be
made on it.
Unregister the handsets
1 If two handsets share the same base
station, you can unregister a handset with
another handset.
2 Press MENU/OK.
3 Select [Services] > [Unregister], then
press MENU/OKtoconrm.
4 Enter the system PIN/passcode. (The
preset PIN/passcode is 0000). Press
REDIAL/C to remove the number.
5 Select the handset number to be
unregistered.
6 Press MENU/OKtoconrm.
» The handset is unregistered.
Tip
• The handset number displays beside the handset name
in standby mode.
Restore default settings
You can reset your phone settings to the
original factory settings.
1 Press MENU/OK.
2 Select [Services] > [Reset], then press
MENU/OKtoconrm.
» Thehandsetdisplaysaconrmation
request.
3 Press MENU/OKtoconrm.
» All settings except the phonebook are
reset.
 previous next