Philips M550 Cordless Telephone User Manual


  Open as PDF
of 38
 
8 EN
Warning
• Check the battery polarity when inserting in the
battery compartment. Incorrect polarity may damage
the product.
Set the date and time
Tip
• To set the date and time later, press REDIAL/C to skip
this setting.
1 Press MENU/OK.
2 Select [Phone setup] > [Date & time],
then press MENU/OKtoconrm.
3 Press the numeric buttons to enter the
date, then press MENU/OKtoconrm.
» The time setting menu is displayed on
the handset.
4 Press the numeric buttons to enter the
time.
• If the time is in 12-hour format, press
/ to select [am] or [pm] (Country
dependent).
5 Press MENU/OKtoconrm.
Change the remote access
PIN code
Note
• The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1 Press MENU/OK.
2 Select [Answ. Machine] > [Remote
access] > [Change PIN], then press
MENU/OKtoconrm.
3 Enter the old PIN/passcode, then press
MENU/OKtoconrm.
4 Enter the new PIN/passcode, then press
MENU/OKtoconrm.
5 Enter the new PIN/passcode again, then
press MENU/OKtoconrm.
» The setting is saved.
Charge the handset
Charge your handset by docking it in either
direction. When the handset is placed correctly
on the base station, you hear a docking tone
(see 'Set the docking tone' on page 18). The
LEDatthebackofthehandsetashesonce.
» The handset starts charging.
Note
• Chargethebatteriesfor8hoursbeforerstuse.
• If the handset becomes warm when the batteries are
being charged, it is normal.
• Over time, capacity of batteries decreases. This is a
normal battery behavior.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the
base station, the bars indicate the
battery level (full, medium and
low).
 previous next