Philips D711 Telephone User Manual


 
4.12 Resetting the unit
When you reset the unit, the settings listed in Table "4.1 Default settings",
under the section entitled "After reset" are established.
Initial state:
idle
Steps:
No. Description Input Display
Please note that the display only changes about 10 seconds after you
have pressed
o . The top two lines are then displayed in black for about
10 seconds, while all pictograms are displayed in the 3rd line.
4.13 Programming picking up a call/conversation
(SmartLine D721 only)
You can program whether a connection can only be picked up during the
ringing phase or also after a call has been accepted ("Line pick-up = on").
A practical example of "pick up during a call" is when an answering
machine is connected to the analog port and you want to accept the call
after the answering machine has already answered it.
06.05.9988810:40
((((((((((((((((
ŋǤ‰ ÏÌÓÛı
o
Confirm reset3
RESET
OK = Confirm
ŠǤ‰ÏÌÓÛı
Z
Enter the PIN2
RESET
PIN ? ----
ŠǤ‰ÏÌÓÛı
s 0 0 9
Initiate
programming
1
53