Philips D711 Telephone User Manual


 
Establishing and undoing a plugged connection
Insert the plug into the socket so that the locking
catch points in the direction of the corresponding
cut-out in the socket. Push the plug into the socket
until it audibly locks.
To undo a plug-in connection, press the locking
catch in the direction of the plug and pull out the
plug at the same time.
Initial programming
Although your telephone is immediately operable after connection to the
telephone network, you should first adapt it to your specific needs by pro-
gramming.
MSN input (see 4.15)
Defining the local area code (see 4.18)
Programming the national code (see 4.16)
Programming the international code (see 4.14)
If required, you should then:
Change the PIN (see 4.19)
Define a charge factor (see 4
.11)
Program an exchange line code (only if you operate the telephone on
a telecommunications system - see 4.3)
Define barred numbers (see 4.21)
Set ringing tones (see 3.4.7)
Program the telephone book (see 4.22).
11
Cut-out
Socket
Plug
Catch hook
1
2