Filter
Top Products
38 EN
4
Press a key to carry out a function. See the
Remote access commands table below for
a list of available functions.
Note
•
When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Repeat the current or listen to the
previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine on.
(not available when you listen to the
messages).
8 Stop listening to the message.
9 Switch the answering machine off.
(not available when you listen to the
messages).
Behavior of the LED display on the
base station
The table below shows you the current status
with different LED display behavior on the base
station.
LED
display
Answering
machine
status
Message status
No
display
Off --
On No message
On It is steady on when
there are 3 new
messages.
On It ashes when the
memory is full.
On It keeps scrolling when
the answering machine
is recording the
incoming message or
announcement.
On
Press
/ to display
the volume level.
On It ashes when you
access the answering
machine menu from
the handset, the
answering machine
remotely, or listen to
messages from the
handset.