Philips CD490 Telephone User Manual


 
30 EN
Manual registration
If auto registration fails, register your handset
manually to the base station.
1
Select [Menu] > > [Register], then press
[OK] to conrm.
2
Press and hold on the base station for 5
seconds.
Note
For models with an answering machine, you hear a
conrmation beep.
3
Enter the system PIN. Press [Clear] to
make corrections.
4
Press [OK] to conrm the PIN.
» Registration is completed in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notication
message. Repeat the above procedure if registration fails.
Note
The preset PIN is 0000. No change can be made on it.
Unregister the handsets
1
If two handsets share the same base station,
you can unregister a handset with another
handset.
2
Select [Menu] > > [Unregister], then
press [OK] to conrm.
3
Select the handset number to be
unregistered.
4
Press [OK] to conrm.
» The handset is unregistered.
Tip
The handset number displays beside the handset name
in standby mode.
Call services
The call services are network and country
dependent. Contact your service provider for
more information.
Note
For the call services to work properly, make sure that
the activation and/or deactivation codes are correctly
entered.
Call forward
You can divert your calls to another phone
number. You can select among 3 options:
[Call forward]: divert all incoming calls to
another number.
[Call fwd busy]: divert calls when the line
is busy.
[Call fwd unans]: divert calls when no one
answers.
Activate/Deactivate call forward
1
Select [Menu] > > [Call Services] >
[Call forward]/[Call fwd busy]/[Call fwd
unans]
2
Select [Activate]/[Deactivate], then press
[OK] to conrm.
3
Enter the telephone number.
» The setting is saved .