Philips CD290 Telephone User Manual


  Open as PDF
of 44
 
English
EN 27
Register the handsets
You can register additional handsets to the base
station. The base station can register up to 5
handsets.
Auto registration
Place the unregistered handset on the base
station.
» The handset detects the base station
and start to register automatically.
» Registration is completed in less than 2
minutes. The base station automatically
assigns a handset number to the
handset.
If auto registration fails, register your handset
manually to the base station.
1
Select [Menu] > [Services] > [Register],
then press [OK] to conrm.
2
Enter the system PIN. Press [Clear] to
make corrections. Press [OK] to conrm
the PIN.
3
Press and hold on the base station for 5
seconds.
Note
•
For models with an answering machine, you hear a
conrmation beep.
4
Press [OK] to start the registration.
» Registration is complete in less than 2
minutes. The base automatically assigns
a handset number to the handset.
Note
•
If the PIN is incorrect or no base is found within a
certain period, your handset displays a notication
message. Repeat the above procedure if registration fails.
Note
•
The preset PIN is 0000. No change can be made on it.
Select the recall duration
Ensure that the recall time is set correctly before
you can answer a second call. In normal case, the
phone is already preset for the recall duration.
You can select among 3 options: [Short],
[Medium] and [Long]. The number of available
options varies with different countries. For
details, consult your service provider.
1
Select [Menu] >[Services] > [Recall time],
then press [OK] to conrm.
2
Select an option, then press [OK] to
conrm.
» The setting is saved.
Dial mode
Note
•
This feature only applies to models that support both
tone and pulse dial.
Dial mode is the telephone signal used in your
country. The phone supports tone (DTMF) and
pulse (rotary) dial. Consult the service provider
for detailed information.
Set the dial mode
1
Select [Menu] > [Services] > [Dial mode],
then press [OK] to conrm.
2
Select a dial mode, then press [OK] to
conrm.
» The setting is saved.
Note
•
If your phone is in pulse dial mode, press during a
call for temporary tone mode. Digits entered for this
call are then sent out as tone signals.
 previous next