Philips CD290 Telephone User Manual


 
English
EN 13
Turn the speaker on or off
Press .
Make a second call
Note
This service is network dependent.
1
Press during a call.
» The rst call is put on hold.
2
Dial the second number.
» The number displayed on the screen is
dialed out.
Answer a second call
Note
This service is network dependent.
When there is a periodical beep to notify you
of an incoming call, you can answer the call in
these ways:
1
Press and to answer the call.
» The rst call is put on hold, and you are
now connected to the second call.
2
Press and to end the current call and
answer the rst call.
Switch between two calls
You can switch your calls in these ways:
Press
and ; or
Press [Option] and select [Switch calls],
then press [OK] again to conrm.
» The current call is put on hold, and you
are now connected to the other call.
Answer a call
When there is an incoming call, the phone rings.
Press
or to answer the call.
Warning
When the handset rings or when the handsfree is
activated, keep the handset away from your ear to
avoid ear damage.
Note
The caller ID service is available if you have registered
to the caller ID service with your service provider.
Tip
When there is a missed call, a notication message
appears.
Turn off the ringer for an incoming call
When the phone rings, press [Silent].
Adjust the earpiece/speaker
volume
Press / to adjust the volume during a call.
» The earpiece/speaker volume is
adjusted and the phone is back to the
call screen.
Mute the microphone
1
Press during a call.
» The handset displays [Mute on].
» The caller cannot hear you, but you can
still hear his voice.
2
Press again to unmute the microphone.
» You can now communicate with the
caller.