Philips CD170 Telephone User Manual


  Open as PDF
of 40
 
26
Note
Toresettherstringstatus,gotothereset •
menu.
ECO mode
The ECO mode reduces the transmission
power of the handset and base station.
1 Press MENU.
2 Select [ADVANCED SET] > [ECO], then
press OKtoconrm.
3 Select [ON]/[OFF], then press OK to
conrm.
The setting is saved. »
» ECO is displayed.
Note
When • ECO is activated, the connection range
between the handset and the base station can
be reduced.
Tip
The carrier code contains 2 or 3 digits. •
For more information, contact the service
provider.
Activate the carrier code
1 Press MENU.
2 Select [ADVANCED SET] > [CARRIER
CODE], then press OK.
3 Enter the carrier code, then press OK to
conrm.
The setting is saved. »
Deactivate the carrier code
1 Press MENU.
2 Select [ADVANCED SET] > [CARRIER
CODE], then press OK.
3 To delete all digits, press BACK, then
press OKtoconrm.
The setting is saved. »
First ring
If you have subscribed for caller ID service with
your service provider, your phone can suppress
therstringbeforethecallerIDdisplayson
the screen. After the phone is reset, it can
detect automatically if the caller ID service
issubscribedandstarttosuppresstherst
ring. You can change this setting to suit your
preference. This feature only applies to models
withrstringsupport.
Turntherstringon/off
1 Press MENU.
2 Select [ADVANCED SET] > [FIRST
RING], then press OKtoconrm.
3 Select [ON]/[OFF], press OKtoconrm.
The setting is saved. »
EN
IFU_CD170-175_05_EN.indd 26 2009-12-17 17:30:41
 previous next