Philips CD170 Cordless Telephone User Manual


 
14
Check the signal strength
It displays the link status between
the handset and base station. The
more bars are shown, the better
the signal strength is.
Ensure the handset is linked to the base •
station before you make or receive calls
and carry out the phone functions and
features.
If you hear warning tones when you are •
on the phone, the handset is almost out
of battery or the handset is out of range.
Charge the battery or move the handset
nearer to the base station.
Switch your handset On/Off
Press and hold • to switch off the
handset. The handset’s screen turns off.
Note
When the handset is switched off, no call can
be received.
Press and hold • to switch on the
handset. It takes a few seconds for the
handset to power up.
Set the date and time
1
Press MENU.
2 Select [CLOCK&ALARM] > [DATE/
TIME], then press OKtoconrm.
3 Press the numeric buttons to enter the
date, then press OKtoconrm.
On the handset, the time set menu is »
displayed.
4 Press the numeric buttons to enter the
time.
If the time is in 12-hour format, press •
/ to select [AM] or [PM].
5 Press OKtoconrm.
Set the date and time format
1
Press MENU.
2 Select [CLOCK&ALARM] > [SET
FORMAT], then press OKtoconrm.
3 Select [DATE FORMAT] or [TIME
FORMAT].
4 Select the setting. Select [DD/MM] or
[MM/DD] as the date display and [12
HOURS] or [24 HOURS] as the time
display. Then press OKtoconrm.
The setting is saved. »
Display the date and time
1
Press and hold OK.
2 Press and hold OK again to display the
handset name.
What is standby mode?
Your phone is in standby mode when it is idle.
The standby screen displays the handset name
and number/date and time, signal icon, and
battery icon.
EN
IFU_CD170-175_05_EN.indd 14 2009-12-17 17:30:38