Filter
Top Products
On Hold 60
SmartLink 4050 Series Getting Started Guide 4 • Operating the VoIP SIP phone
On Hold
While having a conversation, press the Hold button. To resume the conversation, press
Hold again.
Call Forwarding
Refer to sections “Call forwarding” on page 28 and “Call Forward” on page 50 to set up call forwarding.
Call Waiting (internal/external)
While having a conversation:
1. Press the flashing local multiline key
M1 to M10 button to pick up another incoming call.
The first caller is automatically placed on hold.
2. Press the flashing local multiline key
M1 to M10 button of the first caller to retrieve the
call again.
One-Touch Dialing
Using a local multiline key (M2–M10) set for one-touch dialing, press the pre-programmed local multiline key
M1 to M10 to make a call.
Three-Way Conferencing
1. Lift the handset and call person A.
2. After Person A picks up the phone, press the 3-way conference key to place Person A on hold.
3. Dial the extension or phone number of Person B.