Filter
Top Products
Phone Settings 50
SmartLink 4050 Series Getting Started Guide 3 • Using the configuration menu
Call Waiting
Click to Enable or Disable call waiting.
Anonymous Call
Select how much information about the SIP phone user will be sent to the called party’s phone:
• Disable—If
Disable is selected, full URI and name are sent to the receiver’s phone when the user makes a
phone call. The URI and name of the caller are displayed on the receiver’s phone.
• Full URI—If
Full URI is selected, only user name is displayed on the receiver’s phone when the user makes
a phone call.
• Display Name—If
Display Name is selected, only name is displayed on the receiver’s phone when the user
makes a phone call.
Anonymous Call Reject
Click Enable to reject anonymous calls. Click Disable to accept anonymous calls.
Call Forward
Select how call forwarding is handled:
• No Answer—Click
No Answer to enable call forwarding to another number when no one answers the
phone after 180 seconds (default). The timer can be changed from 0–600 seconds (see section “Timer” to
change the timer setting). Enter the call forwarding number in the text box.
• Busy—Click
Busy to enable call forward to another number when user is busy on the phone. Enter the call
forwarding number in the text box.
• Unconditional—Click
Unconditional to transfer all incoming calls to another number. Enter the call for-
warding number in the text box.
Timer
NTP Recycle
NTP recycle time.
Inter Digit
The time interval that the IP phone waits to detect the end of DTMF digits. No more digits are accepted after
this period and the phone begins to dial.
Originating Not Accept
The time interval that the caller’s phone waits to establish a call. If the receiver fails to answer the phone during
this time interval, the caller’s phone will automatically disconnect.
Incoming No Answer
The time interval that the receiver’s phone will ring. If the receiver fails to answer the phone during this time
interval, the phone will automatically disconnect.
Hold Recall
The time interval that the caller is put on hold before the phone automatically disconnect.