Filter
Top Products
19
English
aDjuSting the Volume
• During the call, turn the scroll wheel on the Parrot MK6100. The volume setting is
saved for subsequent calls.
Changing to DiSCreet moDe
• During a call, if you want to continue the conversation on your phone (private
conversation), press the green button on the Parrot MK6100. The call is
transferred to the phone.
• If you want to switch back to the kit, press the green button again.
miCrophone mute
• During a call, if you do not want the person on the other
end of the line to hear you, quickly press the «Play» button
on the remote controls of the Parrot MK6100. Press the
button again to cancel the mute.
SenDing DtmFS
• During a call, you can send DTMFs (Dual-Tone Multi-Frequency) for touch-tone
dialling. This feature can be used for managing your voicemail, for example.
• Press the scroll wheel - the kit says «0».
• Turn the wheel to scroll through the numbers.
• Press the scroll wheel to send the selected number to the phone.
• Repeat this sequence for sending other DTMFs.
Clearing the memory
• You can pair up to 10 devices.
• If you attempt to pair an 11th device, the kit displays «memory full».
• To pair a new phone, you must clear the memory by the sub-menu “Settings /
paired devices”.
CAUTION: This will clear all the contacts and voiceprints associated with the phone
at the same time.
SeleCting a phone
If several phones are paired with the Parrot MK6100, you can easily select the phone
to be used.
1. Hold down the red button.
> The kit displays the list of available phones.
2. Select the phone that you wish to use via the scroll wheel.
3. Confirm.
Note: the use of certain features (voice recognition, redial, discreet mode)
depends exclusively on your phone. Refer to the Support heading on our
website at www.parrot.com for further information.