Filter
Top Products
2
Handset:
#Press á.
$Wait until a long beep sounds and the
display shows the registered number.
The registration will be then complete.
•The registered number “[1]
”
to “[3]” is shown on
the top right of the display.
24
Registration for Additional Handsets
KX-TG2382B
KX-TGA230B
OR
KX-TGA230W
KX-TG2382B includes two handsets with the base unit. You can expand
the system by adding up to 1 optional handset to the system. A maximum
of 3 handsets can be registered at the base unit. Generally a maximum of
3 extensions excluding or including the base unit can operate at a time.
But while you make a conference call (p. 45), the 3rd handset cannot
operate. “Busy” will be displayed when you try to operate 3rd handset.
The included handsets are pre-registered at the factory and assigned
the extension number 1 and 2. You do not need to register these
handsets which has “[1]” and “[2]” on the display.
If you purchase an optional handset, you must register it at the base unit.
A handset will be assigned the extension number 3 at registration. The 3rd
handset is displayed “[3]”.
The model numbers of the optional handsets are KX-TGA230B and
KX-TGA230W. To order, contact your dealer or call
1-800-211-PANA(7262)
to locate a dealer.
Make sure the base unit and the other handsets are not being used.
Registration must be completed within 1 minute.
The handset display shows the instructions as
shown on the right.
1
Base unit:
Press and hold
HANDSET LOCATOR/INTERCOM (ALL)
until the CHARGE indicator flashes.
Press [ALL] on
base for 3 sec,
then press [
H
].
Handset
Registering
Ex. Extension number 3
Handset [3]
Registered
[3]