Filter
Top Products
21
Preparation
For assistance, please call: 1-800-211-PANA(7262)
Ringer Tone
You can select the handset ringer tone out of 6 patterns for each line. When
a call is being received on the line, the handset rings in the selected tone.
LINE 1 is preset to “1”. LINE 2 is preset to “2”.
Make sure the unit is not being used and the handset is lifted off the
base unit.
1
Press (HOLD/FUNCTION/CLEAR).
2
Scroll to “Ringer tone” by pressing Ö or
Ñ.
3
Press á.
4
Press Ö (Line1) or Ñ (Line2) to
select the line.
•The line’s current setting will be displayed.
5
Select the desired ringer tone by pressing
Ö or Ñ.
•Each time you press Ö or Ñ, the ringer
tone will change and ring.
•You can also select the ringer tone by
pressing dialing buttons (1)
to (6).
•If you set the ringer volume to OFF, the
handset will not ring (p. 20).
6
Press á (Save key).
•A beep sounds.
•To program the other line, start again from step 2.
•To exit the programming mode, press (OFF).
•You can exit the programming mode any time by pressing (OFF).
Ringer volume
H
Ringer tone
Program
Ringer tone
Line1:1
GF H
=Save
Ringer tone
Line1:3
GF H
=Save
Ringer tone
Line1:3
Ringer tone
G
=Line1
F
=Line2