Filter
Top Products
2.3 Maintenance
42 Programming Guide
Programming Auto Disconnect Time Settings
Periodic Diagnosis Time Interval Settings
Program Version
Password (Confirmation)
Confirmation of the administrator-level log-in password.
No default Max. 16 characters
Parameter & Description Default Value Range
Programming Auto Disconnect Time (min) 1-30min
Specifies the time (in minutes) until programming is
automatically terminated.
If the specified period of time passes with no programming
input, programming will automatically be terminated. This
prevents problems caused by continuation of log-in status in
cases such as being unable to log out due to the sudden
failure of a PC.
10 1 to 30
Parameter & Description Default Value Range
*
Periodic Diagnosis Time Interval (min) 0-1440min
Specifies the time (in minutes) between periodic self-
diagnoses to test operation as described in "2.3.3 Diagnosis".
If failures are detected during the self-diagnosis, the card will
alert the PBX.
60 0 (no periodic
diagnosis),
1 to 1440
Parameter Default Value Range
Program Version
Display only
Parameter & Description Default Value Range