Filter
Top Products
Setting Description Value Range Default
Network Configure the basic network settings.
If you select DHCP, you must then
select whether the DNS setting is
configured automatically or
manually. If you select STATIC, you
must manually specify the IP
address, subnet mask, default
gateway, and DNS servers.
DHCP, STATIC —
DNS (DHCP only) Select whether the DNS server
information should be obtained
automatically (i.e., provided by the
DHCP server) or if you will specify it
manually.
If you select Manual, see "DNS1" and
"DNS2" below.
Manual, Automatic Automatic
IP address
*1
(STATIC
only)
Enter the IP address to assign to the
unit.
xxx.xxx.xxx.xxx —
Subnet mask
*1
(STATIC only)
Enter the subnet mask for your
network.
xxx.xxx.xxx.xxx —
Default Gateway
*1
(STATIC only)
Enter the IP address of the default
gateway for your network.
xxx.xxx.xxx.xxx —
DNS1
*1
(STATIC or
Manual DNS)
Enter the IP address of the primary
DNS server.
xxx.xxx.xxx.xxx —
DNS2
*1
(STATIC or
Manual DNS)
Enter the IP address of the
secondary DNS server.
If a secondary DNS server is not
required, leave this item blank.
xxx.xxx.xxx.xxx —
VLAN Configure the VLAN (Virtual LAN)
settings.
— —
Enable VLAN Select whether to enable the VLAN
functionality.
Yes, No No
IP Phone Specify the necessary settings for
using the phone features over a
VLAN.
— —
VLAN ID Specify the VLAN ID. 1–4094 2
Priority Specify the priority of packets sent
from this unit.
0–7 7
PC (KX-UT123/
KX-UT133/KX-UT136
only)
Specify the necessary settings for
using a PC over a VLAN.
— —
Document Version 2011-06 Operating Instructions 43
Customizing the Telephone