Filter
Top Products
Flexible Buttons
(KX-UT133/KX-UT136
only)
The flexible buttons on the unit can be customized to be
used to make or receive calls or as feature buttons.
These buttons are configured by your administrator or
dealer.
The following types of flexible buttons are available:
DN (Directory Number)
Seizes the line assigned to the DN button. When a
call arrives at the DN button, pressing the button
answers the call.
Lamp Indication
• Off: Idle
• Green on: You are on a call using the DN
button.
• Flashing green rapidly: A call is being
received.
• Flashing green slowly: A call is on hold.
• Red on: A shared line is in use or on hold
(private) at another unit.
• Flashing red slowly: A shared line is on hold
(normal) at another unit.
Note
• A ring tone can be assigned to each DN
button through Web user interface
programming. When a call arrives at a DN
button, the ring tone assigned to that button
plays. For details, consult your
administrator or dealer.
• A shared line is a line that can be used by
multiple units. This is an optional feature
and may not be supported on your phone
system.
One-Touch
Calls the party or accesses a feature assigned to
the button. See "One-touch Dialing (KX-UT133/
KX-UT136 only) (Page 26)".
Headset
Enables or disables talking using the headset.
Lamp Indication
• Off: Headset off
• Red on: Headset on
BLF (Busy Lamp Field)
Calls the extension assigned to the button. During
a conversation, a BLF button can be used to
transfer calls to the assigned extension (Page 30).
A BLF button’s lamp also shows the current status
of the assigned extension.
Lamp Indication
• Off: The assigned extension is idle.
• Red on: The assigned extension is using the
line.
• Flashing red rapidly: The assigned extension
is receiving an incoming call.
If enabled through Web user interface
programming, pressing the button answers the
call (Directed Call Pickup).
Note
• BLF (Busy Lamp Field) is an optional
feature and may not be supported on your
phone system.
ACD
Logs in to or logs out of a group when ACD
(Automatic Call Distribution) is enabled (Page 33).
Lamp Indication
• Off: Logged in
• Red on: Logged out
Note
• ACD is an optional feature and may not be
supported on your phone system.
34 Operating Instructions Document Version 2011-06
Feature Operations