Filter
Top Products
Caller ID Service
For assistance, please visit http://www.panasonic.com/phonehelp 47
Storing caller information
into the speed dialer
I
mpor
t
an
t
:
LMake sure that the unit is in standby
mode.
1 Press {CALLER ID}.
2 Select the desired item, then press
{MENU/SET}.
3 Select “Copy To SPD”.
LTo edit the phone number, press
{>} repeatedly until the phone
number is shown in the desired
format. ({<} does not work.)
4 Press {MENU/SET}.
5 Press the speed dial button ({1} to
{16}).
OR
Press {LOWER}, then press the
speed dial button ({1} to {16}).
6 Press {CALLER ID} to return to
standby mode.
N
o
t
e:
LTo return to the previous menu, press
{<}.
LIf the speed dial has already stored
the content, you can select whether it
should be replaced or not. To replace
current content, select “Yes?”, then
press {MENU/SET}. To keep original
content, select “No?”, then press
{MENU/SET}.
Erasing selected caller
information
I
mpor
t
an
t
:
LMake sure that the unit is in standby
mode.
1 Press {CALLER ID}.
2 Select the desired item, then press
{ERASE}.
3 Select “Yes?”, then press {ERASE}
or {MENU/SET}.
LTo cancel, select “No?”, then press
{MENU/SET}.
4 Press {CALLER ID} to return to
standby mode.
N
o
t
e:
LTo return to the previous menu, press
{<}.
Erasing all caller
information
I
mpor
t
an
t
:
LMake sure that the unit is in standby
mode.
1 Press {CALLER ID}.
2 Press {ERASE}.
3 Select “Yes?”, then press {ERASE}
or {MENU/SET}.
LTo cancel, select “No?”, then press
{MENU/SET}.
4 Press {CALLER ID} to return to
standby mode.
N
o
t
e:
LTo return to the previous menu, press
{<}.