Filter
Top Products
To set the link speed and duplex mode
In cases when buttons/soft key icons are shown in English alphabet
1. Base unit: [MENU] (middle soft key) ® [#][5][3][0]
Handset: [MENU] (center of joystick) ® [#][5][3][0]
• For KX-TGP500 users: go to step 4.
2. [ ]/[ ]: Select "Speed/Duplex" ® [SELECT]
3. [ ]/[ ]: Select "LAN port" or "PC port" ® [SELECT]
4. [
]/[ ]: Select the desired option ® [SAVE]
5. Base unit: [EXIT]
Handset: [OFF]
In cases when buttons/soft key icons are shown in symbols/pictures
1. Base unit:
(middle soft key) ® [#][5][3][0]
Handset: (center of joystick) ® [#][5][3][0]
• For KX-TGP500 users: go to step 4.
2. [ ]/[ ]: Select "Speed/Duplex" ®
3. [ ]/[ ]: Select "LAN port" or "PC port" ®
4. [ ]/[ ]: Select the desired option ®
5. Base unit: [ ]
Handset: [ ]
Note
• After you have finished configuring the settings, the base unit will restart automatically once the base
unit or handset returns to idle.
• For KX-TGP500 users: only the LAN port setting is available because the unit does not have a PC port.
2.1.3 VLAN Settings (KX-TGP550 only)
You can change the VLAN settings for the unit and for the PC. The default setting for "Enable VLAN"
is "No".
For details about configuring VLAN settings from the Web user interface, see 3.4.2.2 VLAN Settings.
To enable VLAN settings
In cases when buttons/soft key icons are shown in English alphabet
1. Base unit: [MENU] (middle soft key) ® [#][5][3][0]
Handset: [MENU] (center of joystick) ® [#][5][3][0]
2. [
]/[ ]: Select "VLAN setting" ® [SELECT]
3. [ ]/[ ]: Select "Enable VLAN" ® [SELECT]
4. [
]/[ ]: Select "Yes" ® [SAVE]
• Select "No" to disable VLAN settings.
5. Base unit: [EXIT]
Handset: [OFF]
In cases when buttons/soft key icons are shown in symbols/pictures
1. Base unit:
(middle soft key) ® [#][5][3][0]
Handset:
(center of joystick) ® [#][5][3][0]
2. [ ]/[ ]: Select "VLAN setting" ®
Document Version 2010.03.15 Administrator Guide 35
2.1.3 VLAN Settings (KX-TGP550 only)