Filter
Top Products
[Dial Plan Flowchart]
When a user dials a single digit on a unit, the following sequence of events begins.
A
B
B
A user dials a single digit on the unit.
The unit stores the dialed digits.
The unit compares the dialed digits with each dial plan.
Do the dialed digits fully or
partially match in the dial plan?
Yes
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No Match
No
No
No
Yes
No
No
To
To
A
To
The call is initiated.
No
Complete Match Partial Match
Does the dial
plan contain "!"
for number
barring?
Does the dial plan
contain "." for element
repetition?
Has [Call Even If
Dial Plan Does
Not Match] been
set to [Yes]?
Does the user
press the # key?
The call is denied.
The call is initiated.
The inter-digit timer starts.
Does the user dial
the subsequent digit
before the inter-digit timer
expires?
Has [Call Even If
Dial Plan Does Not
Match] been set to
[Yes]?
The call is initiated. The call is denied.
Does the dialed number of
digits exceed the number
of digits up to 2 characters
before "." in the dial plan?
Does the user
press the # key?
The inter-digit timer starts.
Does the user dial
the subsequent digit
before the inter-digit
timer expires?
The call is initiated.
The call is denied.
The call is denied.
The call is initiated.
Has [Call Even If
Dial Plan Does Not
Match] been set to
[Yes]?
Does the user
press the # key?
A
5.3.1 Dial Plan Settings
To set Dial Plan
1. In the Web user interface, click the [Telephone] tab, and then click [Call Control [Line 1]–[Line 8]].
2. In [Dial Plan], enter the desired dial format.
The dial plan settings can be configured for each line separately.
206 Administrator Guide Document Version 2010.03.15
5.3.1 Dial Plan Settings