Filter
Top Products
Programming
18
Special programming
Alarm
An alarm sounds at the set time (once or daily)
for 2 minutes. You can also customise the
repeat times and the repeat cycle (snooze
function). Alarm can be set for each handset.
Example: If you want the alarm to sound 3
times, repeating at 5 minute intervals from
7:00, you need to set the alarm as follows;
Time: “07:00”
“Repeat Times”: “3 Times”
“Repeat Cycle”: “5 Minutes”
Important:
L Set the date and time beforehand (page
11).
1 {j/OK}
2 {r}: “Set Time” s {j/OK}
3 {r}: “Alarm” s {j/OK}
4 {r}: “Alarm Mode” s {j/OK}
5 {r}: Select the desired alarm option. s
{j/OK}
6 Set the desired time. s {j/OK}
7 {r}: “Repeat Times” s {j/OK}
8 {r}: Select the desired setting. s
{j/OK}
L If you only want the alarm to sound 1
time, select “Off” and go to step 11.
9 {r}: “Repeat Cycle” s {j/OK}
10 {r}: Select the desired setting. s
{j/OK}
11 {r}: “Ringtone” s {j/OK}
12 {r}: Select the desired alarm tone. s
{j/OK}
L We recommend selecting a different
ringer tone from the one used for
outside calls.
13 {r}: “Volume” s {j/OK}
14 {r}: Select the desired volume. s
{j/OK}
15 {m}
Note:
L Press {m} to stop the alarm completely.
L Press any dial key from z to 9, *, or y
to stop the sound but keep the set time
and/or the snooze function activated.
L When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
“Off”
Turns alarm off. Go to step 15.
“Once”
An alarm sounds once at the set time.
“Daily”
An alarm sounds daily at the set time.
TGB21xBX_UE(en).book Page 18 Friday, May 30, 2014 11:54 AM