Filter
Top Products
Programming
17
*1 Ringer volume cannot be turned off for paging.
*2 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*3 If you program these settings using one of the handsets, you do not need to program the same
item using another handset. (KX-TGB212/KX-TGB213)
*4 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”. (Caller
ID subscribers only)
To use this feature, set the date and time first (page 11).
*5 When this feature is set to off, the handset number is displayed.
*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*7 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys.
*8 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*9 KX-TGB212/KX-TGB213
*10To prevent other users from joining your conversations with outside callers, turn this feature
on.
Setup Language
<English>
–11
Contrast
(Display contrast)
<Contrast 04>
––
Clock Disp.
*5
<On>
––
Auto Talk
*6
<Off>
–12
Register HS –28
Keytones
*7
<On>
––
Dial Mode
*3
<Tone>
–11
Recall/Flash
*3,
*8
<600 msec.>
–13
Privacy Mode
*3,
*9,
*10
<Off>
––
Change PIN
*3
–28
Intercom
*9
––22
Main menu Sub-menu 1 Sub-menu 2 Page
TGB21xBX_UE(en).book Page 17 Friday, May 30, 2014 11:54 AM