Filter
Top Products
Programming
For assistance, please visit http://www.panasonic.com/phonehelp 31
Programming using the direct commands
1 {MENU} (middle soft key) i {#}
2 Enter the desired feature code.
3 Enter the desired setting code.
LThis step may vary depending on the feature being programmed.
4 {SAVE} i {OFF}
Note:
LIn the following table, < > indicates the default setting.
LIf you make a mistake or enter the wrong code, press {OFF}, then start again from step
1.
Please refer to the base unit operating instructions for the settings related to the
following features:
– Answering system (KX-TG5771/KX-TG5776/KX-TG5777 only)
– Voice Mail service
– Intercom
– System settings (such as dialing mode, line mode, etc.)
Feature Feature
code
Setting code System
setting
*1
Page
Auto talk
*2
{2}{0}{0}{1}: On {0}: <Off>–17
Auto Intercom {2}{7}{3}{1}: On(Ringer On)
{2}: On(Ringer Off)
{0}: <Off>
––
Caller ID edit
(Caller ID number auto
edit)
{2}{1}{4}{1}: <On> {0}: Off –27
Change language
(Display language)
{1}{1}{0}{1}: <English>
{2}: Español
–13
Customer support
*3
{6}{8}{0} www.panasonic
.com/phonehelp
––
Date and time {1}{0}{1} – r 35
Deregistration {1}{3}{1} ––13
Handset name {1}{0}{4} ––35
TGA572.book Page 31 Thursday, June 8, 2006 7:03 PM