Panasonic KXTG9391T Answering Machine User Manual


 
Intercom/Locator
43
For assistance, please visit http://www.panasonic.com/help
Intercom
Intercom calls can be made:
between the base unit and handset.
between handsets.
Note:
L When paging unit(s) for an intercom call, the
paged unit(s) beeps for 1 minute.
L If you receive an outside call while talking on the
intercom, an interrupt tone will be heard (page
28).
To answer the call with the base unit, place
the corded handset on the cradle, then lift it
again. If the speakerphone is used, press
{SP-PHONE} 2 times. You can also answer
the call by pressing {LINE 1} or {LINE 2}
after hanging up the intercom.
To answer the call with the handset, press
{OFF}, then press {C}.
Making an intercom call
1
{INTERCOM}
L Lift the corded handset if needed.
L When only 1 handset is registered, the base
unit pages the handset automatically.
2 To page a specific handset, enter the handset
number.
To page all handsets, press {0} or wait for a
few seconds.
L To stop paging, press {INTERCOM}.
3 When you finish talking, press {INTERCOM}
or place the corded handset on the cradle.
1 {INTERCOM}
2 To page the base unit, press {0}.
To page another handset, enter its extension
number.
L To stop paging, press {OFF}.
3 When you finish talking, press {OFF}.
Answering an intercom call
1
Lift the corded handset or press {INTERCOM}
to answer the page.
2 When you finish talking, place the corded
handset on the cradle or press {INTERCOM}.
1 Press {C} to answer the page.
2 When you finish talking, press {OFF}.
Note for base unit and handset:
L The ringer volume for intercom calls follows the
higher volume level of the 2 lines (page 29).
Even when the ringer volume for both lines is set
to off (page 29), the base unit and/or handset
still rings at a low level for intercom calls.
Transferring calls
Outside calls can be transferred between 2 people.
1 During an outside call, press {INTERCOM} to
put the call on hold.
L When only 1 handset is registered, the base
unit pages the handset automatically.
2 To page a specific handset, enter the
extension number.
To page all handsets, press {0} or wait for a
few seconds.
3 Wait for the paged party to answer.
L If the paged party does not answer, press
the flashing {LINE 1} or {LINE 2} to return
to the outside call.
4 Place the corded handset on the cradle or
press {INTERCOM}.
L The outside call is being routed to the
handset.
1 During an outside call, press {INTERCOM}
once to put the call on hold.
: Base unit
Y Handset
: Base unit
Y Handset
: Base unit
Y Handset
TG9391.book Page 43 Tuesday, July 8, 2008 8:01 AM