Filter
Top Products
Programming
29
For assistance, please visit http://www.panasonic.com/help
Note:
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
L If the talking alarm clock is set at the
same time for two or more handsets,
the first handset makes the
announcement, while the other
handsets only sound the tone.
L If the other unit is in use at the set
time, the handsets sound the tone
instead of the selected
announcement.
L If you select “Once”, the setting
changes to “Off” after the alarm
sounds.
L When the ringer volume for outside
calls is set to off (page 24), the alarm
sound is heard at a low level.
Customer support
The handset can display the Internet
address where you can download the
operating instructions or get further
information for this product by using your
computer.
1 {MENU} i {#}{6}{8}{0}
2 {OFF}
Registering a unit
Operating additional
handsets
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L See page 6 for information on the
available model.
Registering a handset to a
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, register the handset.
1 Handset:
{MENU} i {#}{1}{3}{0}
2 Base unit:
■ KX-TG9361
Press and hold {LOCATOR} for 4
seconds. (No registration tone)
■ KX-TG9371/KX-TG9372
Press and hold {LOCATOR} for 4
seconds until the registration tone
sounds.
L If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L The next step should be
completed within 90 seconds.
3 Handset:
Press {OK}, then wait until a long
beep sounds.
4 {OFF}
TG936x_OI.book Page 29 Wednesday, January 2, 2008 9:12 AM