Panasonic KX-TG8021BX Cordless Telephone User Manual


 
Programming
28
4 {V}/{^}: Select Category i
M
5 Press the desired category
numbers. i M
L The selected category number
flashes.
L To cancel a selected category
number, press the number again.
The number stops flashing.
6 {ih}
Selecting area codes to be
deleted automatically
In some situations, phone numbers
stored automatically in the caller list
(page 32) will include area codes. If you
do not want to dial the area codes when
making calls from the caller list, you can
store the area codes which you want the
unit to delete automatically.
Example: You have stored the area
code “123”. If you make a call from the
caller list to the phone number “123-456-
7890”, the unit dials “456-7890”.
1 K (middle soft key) i < i
M
2 {V}/{^}: Area Code i M
3 Enter an area code (5 digits max.).
i M i {ih}
Changing the base unit PIN
(Personal Identification
Number)
Important:
L If you change the PIN, please make
note of your new PIN. The unit will not
reveal the PIN to you. If you forget
your PIN, contact your nearest
Panasonic service centre.
1 K (middle soft key) i < i
M
2 {V}/{^}: Base Unit PIN i
M
3 Enter the current 4-digit base unit
PIN (default: 0000).
4 Enter the new 4-digit base unit PIN.
i M i {ih}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to a
single base unit.
Important:
L The additional handset model
recommended for use with this unit is
noted on page 5. If another handset
model is used, certain operations
(handset settings, base unit settings,
etc.) may not be available.
Additional base units
Handsets can be registered to up to 4
base units, allowing you to add
additional base units and extend the
area in which your handset(s) can be
used. If a handset moves out of range of
its base unit when Auto is selected on
base unit (page 29), it looks for another
base unit to make or receive calls. A
base unit and the handsets it
communicates with is called a “radio
cell”.
Note:
L Calls are disconnected when the
handset moves from one radio cell to
another.
TG8011_8021BX(e).book Page 28 Monday, September 29, 2008 1:07 PM