Filter
Top Products
Preparation
13
Battery installation and
replacement
Important:
L Use the supplied rechargeable
batteries (Part No. HHR-55AAAB).
L When installing the batteries:
– Wipe the battery ends (S, T) with
a dry cloth.
– Avoid touching the battery ends
(S, T) or the unit contacts.
– Confirm correct polarities (S, T).
L When replacing the batteries:
– USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
– Do NOT use Alkaline/Manganese/
Ni-Cd batteries.
– We recommend using the
Panasonic rechargeable batteries
noted on page 5, 7.
1 Firmly press the notch on the
handset cover and slide it in the
direction of the arrow.
2 Insert the batteries negative (T)
end first. Close the handset cover.
Important:
L If the handset does not automatically
turn on after installing/replacing
batteries, press {ih} for about 1
second, or place the handset on the
base unit or charger.
Note:
L When replacing batteries, remove the
old batteries.
Battery charge
Place the handset on the base unit or
charger for about 7 hours before
initial use.
L While charging, “Charging” is
displayed and the charge indicator on
the handset lights up. When the
batteries are fully charged, “Charge
Completed” displays. The charge
indicator stays lit even after the
batteries are fully charged.
*1 Model shown is KX-TG8011.
*2 KX-TG8012
Rechargeable Ni-MH ONLY
Base unit
*1
Charger
*2
TG8011_8021BX(e).book Page 13 Monday, September 29, 2008 1:07 PM