Filter
Top Products
Preparation
12
Connections
Connect the AC adaptor cord (A ) by
pressing the plug firmly (B). Connect
the telephone line cord until it clicks into
the base unit and telephone line jack
(C).
Base unit
L Use only the supplied Panasonic AC
adaptor PQLV207BX.
L Use only the supplied telephone line
cord. Using another telephone line
cord may not allow the unit to work
properly.
Charger
L Use only the supplied Panasonic AC
adaptor PQLV209BX.
Note:
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a T-
adaptor.
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
Available for:
KX-TG8012
Hook
(220–240 V AC,
50/60 Hz)
To telephone
line
C
A
B
A
Hooks
B
(220–240 V AC,
50/60 Hz)
To telephone line
DSL/ADSL filter
TG8011_8021BX(e).book Page 12 Monday, September 29, 2008 1:07 PM