Filter
Top Products
Preparation
16
Dialling mode
If you cannot make calls, change this
setting according to your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1 K (middle soft key) i < i
M
2 {V}/{^}: “Dial Mode” i M
3 {V}/{^}: Select the desired setting.
i M i {ih}
Date and time
1
K (middle soft key) i N i
M
2 {V}/{^}: “Time Settings” i
M
3 {V}/{^}: “Set Date & Time” i
M
4 Enter the current date, month, and
year.
Example: 15 July, 2008
{1}{5} {0}{7} {0}{8}
5 Enter the current hour and minute.
Example: 15:30
{1}{5} {3}{0}
6 M i {ih}
Note:
L When you select Arabic as the display
language, enter the current year,
month, and date.
L To correct a digit, press {<} or {>} to
move the cursor to the digit, then
make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
TG8011_8021BX(e).book Page 16 Monday, September 29, 2008 1:07 PM